Impact-resistant 30cm｜Tough industrial flooring designed to withstand heavy impacts
In industrial workshops, tools and heavy workpieces frequently fall and strike the floor, causing standard colored flooring to crack and peel under impact. CS-2000 Floor Stain has been tested by the Guangzhou Aging Institute and withstands drop heights up to 30 cm without cracking or peeling, significantly enhancing the floor's resistance to heavy impacts.
Impact Resistance 30 cm: Withstands heavy object drops; flooring resists cracking.
Summary: In industrial workshops, tools and heavy workpieces often fall and strike the floor, causing ordinary colored flooring to crack or peel. CS-2000 Floor Colorant has been tested by the Guangzhou Aging Institute.Impact-resistant height: 30 cm; paint film remains intact under impact without cracking or peeling., enhance the floor's resistance to heavy impact.
Heavy object impact: an overlooked pain point for industrial flooring
In machining, hardware, warehousing, and logistics workshops, falling heavy objects is a frequent on-site scenario: metal workpieces, tool components, or material crates accidentally drop onto the floor surface.
Common damage to standard colored concrete surfaces after impact:
Cracks, chips, and crumbling of the colored surface appear directly at the impact point.
Impact creates visible micro-cracks. Water, gasoline, and dirt seep into the base layer through these gaps, gradually expanding to cause peeling and delamination.
👉 Localized damage requires cutting and patching, halting operations, disrupting factory production, and increasing maintenance costs.
Many engineering applications focus only on wear and chemical resistance, overlooking impact resistance. Wear resistance refers to material loss from continuous friction.Impact resistance refers to the ability to withstand sudden heavy impacts; it cannot be substituted for other properties.Even with excellent wear resistance, heavy impacts can still cause chipping and cracking.
Impact Resistance: Industry Benchmark & Competitive Comparison
According to GB/T 1732‑2020 Test Method for Impact Resistance of Paint Films, a hammer is dropped from a specified height onto the paint film to check for cracking or peeling. Higher drop heights indicate better impact resistance. - ≤10 cm: Low-grade colored topcoat; cracks easily under minor impacts and is suitable only for low-traffic office areas.
‑ 15‑25 cm: Typical range for standard epoxy colored paints and conventional floor coloring products on the market. Suitable for minor item drops; heavy object impacts may cause damage.
‑ 28–35 cm: Mid-to-high-end industrial flooring tier (CS-2000 test shows 30 cm falls within this range)Can withstand impacts from common workpieces and tools falling in the workshop; ‑ ≥40cm: Specialized polyurethane/polyurea heavy-duty system, higher cost, typically used for extreme heavy-load conditions.
Competitive Benchmarking: Most standard epoxy colored flooring products on the market have impact resistance ranging from 15‑25cm. CS-2000 achieves 30cm, offering superior instantaneous impact resistance compared to common colored floor finishes.
In simple terms: With the same impact weight, the 3 cm drop test shows no cracking. In workshops, accidental drops of metal tools or small-to-medium parts onto the floor are unlikely to crack the colored surface, minimizing point damage from impacts.
CS-2000 Floor Coating | Impact Resistance Test
CS-2000 Floor Dye Sample Sent ToChemical Industry Synthetic Materials Aging Quality Supervision and Inspection Center (Guangzhou Aging Institute)Perform comprehensive paint film performance testing. Test items: Impact resistance. Test results:30cm, no cracking or peeling of the paint film after impact
Practical value for project implementation
• Machining & Hardware Workshops: Reduces risk of surface chipping from accidental tool or metal workpiece drops. • Warehousing & Logistics Areas: Minimizes point damage caused by falling materials or周转 bins. • Production & Assembly Workshops: Enhances floor impact tolerance for falling components and fixtures. • Northern Cold Storage Buffer Zones & Unheated Facilities: Withstands dual conditions of low temperature and impact, resisting brittle fracture even when struck in cold environments.
Tip: CS-2000 is a single-component floor coloring agent. Please follow the recommended construction process. Additional performance properties—such as scratch resistance, heat resistance, chemical resistance, boiling water resistance, abrasion resistance, and low-temperature resistance—are covered in separate test reports, available upon request for project needs.
Final Thoughts
Real-world workshop conditions involve more than just continuous friction; they also include sudden heavy impacts. Our impact-resistant performance tests the paint film's toughness, minimizing point-cracking and damage while reducing on-site repair frequency. CS-2000 Floor Toner is third-party certified to withstand 30cm drop impacts, providing an extra layer of protection for industrial flooring.